Leading together
Training Courses
HEALTHCARE
Group
History
Our Mission: Customized turnkey plants in respect of the environment
Our Values
Terms of Delivery
News
News
Service
Download
Company Profile
Plants
Mechanical
Electrical
Healthcare
Service
Discover Brescia
Contact us
Works
Group
History
Our Mission: Customized turnkey plants in respect of the environment
Our Values
Terms of Delivery
News
News
Service
Download
Company Profile
Plants
Mechanical
Electrical
Healthcare
Service
Discover Brescia
Contact us
Works
Training Courses
HEALTHCARE
Plants
Operating fields:
Steel
Aluminium
Pig iron
Copper
R&D
Mechanical
Operating fields:
Design
Automatic system
Machines
Assembly
Revamping
Electrical
Operating fields:
Design
Automation
Software
Combustion
Service
News
Parametric... what does it means? ... that it is possible to "tailor" the operation of Q2 to virtually any burner application technology, modifying parameters and behaviour in each stage of the burner management cycle, activating and assigning a predefined duration to each one. that means ... for each stage you can define which fuel or air valves to turn on, choose which inputs to control, predefine an actuator position that controls the air or gas flow ... ... then it will be simple to configure Q2 to manage: • SINGLE STAGE DIRECT IGNITION UP TO 350kW • MULTISTAGE OF UNLIMITED CAPACITY • INTERMITTENT OR CONTINUOUS OPERATION • ON/OFF OR MODULATING • FLAMELESS • STAGED GAS • STAGED AIR • RECUPERATIVE • REGENERATIVE Here is a summary list of Q2 features: • Supports natural or forced draught gas burners. • Blue flame oil burners. • Single stage burners. • Multi-stage burners. • Permanent operation. • Low air pressure switch. • Low fuel pressure switch. • Proof of closure input. • Up to 4 fuel valves. • Air valve or fan output. • Valve proving system (tightness control). • Flame detection by means of UV sensor, dual or single electrode. • Optional 2nd UV flame detector. • Independent and configurable flame sensitivity. • Electro-optical shutter control. • Ignition transformer can be housed inside. • 3 points actuator with preset positions and remote modulation control. • High-temperature mode for indirect flame surveillance and flameless operation. • Built-in fieldbus control, IIoT ready. • Front magneto-optic jack for configuration and commissioning. • LED-bar flame signal indicator. • Advanced self-diagnostic report of cycle status, lockouts and failures. • Log memory for lockouts, faults, unit and valves operating time.
THE NEW DP1700 DROSS PRESS HAS BEEN INSTALLED AND TESTED WITH EXCELLENT RESULTS. With the new programs and the new format, the DP1700 dross press can achieve a result of 35% recovery of the aluminum content. The alloy tested is 6060 The work cycles were designed and inserted by our process engineer who boasts thirty years of experience in the aluminum foundry for billets and ingots. The new press, in addition to a revisited look, is also equipped with a suction filter system for collecting fumes. The electrical panel developed by ELETTRO2000 is interfaced with the company server to comply with INDUSTRY 4.0 requirements [ngg src="galleries" ids="29" display="basic_imagebrowser"]
PCombustion designs and builds 2 ladle preheating systems for aluminum die casting. the two systems are of the traditional type with burner powered by cold air Modulating regulation is performed via a PID controller All the automation designed and built by ELETTRO2000 is managed by a Safety PLC
The new DROSS press was delivered to an important Italian company. New design and new functions to adapt the press to all aluminum alloys. these new functions increase the possibility of recovering aluminum by modifying the pressing cycles. In this installation the customer requested the filter option to fully comply with environmental directives. In addition to this, the fully integrated automation for industry 4.0 allows remote assistance and data exchange with the company management system. Pcombustion and Elettro2000 together for a better customer service
Pcombustion has installed the new latest generation 10T furnace. The oven fully automated by a Scada system is equipped with a dry hearth and a RILEE fume recirculation system With these two systems, the efficiency of the kiln increases by 30% by loading the material on the dry hearth and making the fumes circulate on it. loaded aluminum of any type gets to pyrolysis in less time, also reducing the amount of slag. Pcombustion studies customized solutions for all sectors and for each customer. Pcombustion's MUST is not to sell an oven but to sell a TAILOR MADE oven for each customer's needs
QUENCING TANK FOR COILS GPM mechanical division of the Pedercini Group has developed, built and machined a coil cooling unit in complete supply. Stainless steel material
GRUPPO
PEDERCINI
“We are the most innovative solution for design, technological innovation and deep industry knowledge from the delivery of energy to its complete control.”
